+ Reply to Thread
Results 1 to 5 of 5

Thread: Do I need a new garage door opener?

  1. #1

    Do I need a new garage door opener?

    I'm having a problem with my garage door opener.

    After leaving the house, I noticed the garage door did not close.

    I tried several times, but the door only moved slightly but would not close.

    I had to go into the garage and release the door opener and then lock the door.

    Do I need a new opener?

  2. #2
    An automatic garage door opener has two devices to protect you and your automobile from harm should the door accidentally close when you are under it. Your problem may be that the photocells are out of adjustment keeping the door from closing.

    There are two photocells located near the bottom of the door's track; one on either side of the door. If the beam from the photocell is blocked, the door will not close. Similarly, if one of the photocells has been moved, the light beam will be off and the door will not close. There should be a colored light on the surface of each beam to let you know the beam is properly adjusted. If one of the adjustment lights is off or is blinking, you can adjust the cell by moving it with your hand until the light is on and steady and stops blinking. This is an easy DIY, but you may have to call a garage door company if the adjustment does not solve your problem.

    Another problem could be the door closer motor sensor. There are two adjustments on the door opener motor. One is an adjustment for the opening force of the door, and the other if for the closing force of the door. Find the closing force adjustment and turn the screw a quarter turn at a time until the door closes and stays closed.

    This may take some time to adjust accurately. Once the door stays closed, open the door and then lower it again trying to stop the door from closing by grasping the bottom rail with your hand.

    If the door does not automatically stop and open up, you need to adjust the closing force until you can stop the door. Sounds easy, but sometimes it takes several attempts to get the adjustment just right.

  3. #3
    Hello friend,
    This problem occur when the door is very older or the quality of the door is not good. To protect from this condition you can buy a new gate. At All Glass and Aluminium, pre-fabricated gates are made from durable Aluminium. Available in any powder coated colour so you can be assured to match or create the desired look. According to me you can choose any from them.

  4. #4
    Similarly, if one of the photocells is moved, the light beam is turned off and the door cannot be closed

  5. #5
    Each beam should have a colored light on its surface to indicate that it has been properly adjusted. If one of the adjustment lights is off or blinking, you can move the cell with your hand until the light is on and steady and no longer blinks. This is a simple DIY here about garage door weather seal replacement, but you may need to contact a garage door company if the adjustment does not work.

+ Reply to Thread

Similar Threads

  1. To refinish a garage door or not
    By Cosmo in forum Home Improvement & Remodeling
    Replies: 1
    Last Post: 07-13-2015, 03:08 PM
  2. Article: Care & Maintenance for your Garage Door
    By administrator in forum Articles
    Replies: 1
    Last Post: 11-21-2012, 02:05 AM
  3. Aluminum gate opener
    By jcopeland364 in forum General Discussion & Reviews
    Replies: 0
    Last Post: 09-07-2012, 08:47 AM
  4. Replies: 1
    Last Post: 05-20-2012, 04:32 PM
  5. SDM Door Master Door Assembly Clamp System
    By First Choice Industrial in forum Woodworking Machines and Tools for Sale
    Replies: 0
    Last Post: 12-01-2011, 11:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •